10mm Low Iron Shower Panel

Ultra clear fixed panel with no green edge. No holes.

Width mm Height mm

200–2400 × 1400mm

Supplied toughened

Rounded corners

Safety corners: Each of the four corners is tipped: the sharp point is cut off and polished, so a corner is less likely to catch skin or clothing, or chip when it is knocked. $16 for all four corners. Rounded corners are priced per corner and replace safety corners.

Need holes or cutouts? Send us your sizes and a drawing and we will quote it. Pet door in glass? Price it here.

Tap to switch an option on or off. Lit = included.

Quantity

Enter your size—

Secure payment by StripeApple PayGoogle PayVisaMastercardAmex

Minimum $57 per piece for the glass. + $59 delivery per order, free from $400, across metro Sydney. Delivery details

About this glass

A fixed 10mm toughened panel for a walk-in or corner shower. It has no holes: it is held by wall brackets or a U-channel and a support bar to the wall, so nothing is drilled through the glass. Edges are polished all round.

Glass only. Hinges, brackets, channels and installation are not included. Add a rounded corner below if you want one, and we will confirm which corner by email before the glass is made.

Good for

Walk-in showers
Corner shower fixed panel and return
Wet room screens
Replacing old shower glass

Thickness	10mm
Weight	About 25kg per m²
Shapes	Rectangle / square
Edges	Polished (selected by default)
Toughened	Yes, always
Size range	200mm up to 2400 × 1400mm
Corners	Optional: safety (tipped) corners, or rounded corners from 2mm radius up

Questions

What thickness is a frameless shower panel?

10mm toughened glass is the usual thickness for a frameless fixed panel, and it is what we supply. Thinner glass is used in framed and semi-frameless screens where a frame supports the edges.

Why no holes?

A fixed panel can be held by wall brackets or clamps, a U-channel along the floor or wall, and a support bar to the wall, all of which grip the glass without drilling. Panels without holes are quicker to make and there is no risk of a hole in the wrong place. Doors on hinges need holes and are not sold online.

Is hardware included?

No, the price is for the glass only. Standard 10mm shower brackets, U-channel and support bars from a bathroom or hardware shop fit our panels. Check the hardware maker's instructions for the gap to leave between the glass and the wall or floor.

How do I measure a fixed shower panel?

Measure the width at the top, middle and bottom and use the smallest. Take off the gap your hardware needs (often 5 to 10mm at the wall). For the height, measure from the hob or floor to where the top of the glass should finish, usually 2000 to 2100mm.

How heavy is a 10mm panel?

About 25kg per square metre, so a 1000 × 2100mm panel is about 53kg. It takes two people to carry and fit. Delivery is to the door at ground level.

Can I get a rounded corner?

Yes. Choose a rounded corner on the product page and tell us which corner (usually the top corner away from the wall). We confirm it with you by email before the glass is made.